Home Page  |  Offset Program  |  Gobizkorea.com  | 
Recommended Commercial items for indirect Offset
Welcome to the website of Recommended-Items
for the Defense Offset Program.


We hereby introduce the complete offset program requirements as well as
superior and reliable products, manufactured by various SMEs in Korea,
which will help enhance the competitiveness of your company.

Use this information for writing your proposals or strengthening your negotiation.


Motor vehicles (20) Marine transport (51)
Railway and tramway machinery and equipment (2) Aircraft (2)
Transportation components and systems (79) Aerospace systems and components and equipment (43)

 
  Home > Transport Vehicles Total: 241 / Page(1/3) 
  Transport Vehicles Show items per page
 
AIRCELL CUSHION SEAT  
2013A25002002
L.C Corporation
 
SE420AR  
2012A22000401
Standard Equipment and Features “ Built-in transom with splash guards “ All around rope lacing for a secure grip “ Two nylon carrying bags “ Two stainless steel D-rings for easy towing “ Carrying handles “ Front lifting / Carrying handles “ Rub strake going all around hull and under inflatable keel “ Two layers of fabric on lower tubes for double the abrasion and puncture protection “ Self-bailing drain valves to empty out rain water “ Foot pump, repair kit and instructions “ 4 oar holders “ Towing rope “ Breakdown aluminum oars “ Plastic floorboard with aluminum SE stringers and uplift bars : FB-1, FB-2, FB-3L, FB-3S and FB-4
WOOSUNG I.B Co., Ltd.
 
ODO/TRIP METER  
2011A28014002
ŌFLASHER
SEYOUNG Co., Ltd.
 
Bus & Truck Lining  
1006A30000101
* Excellent brake power Using the test equipment developed and manufactured by Japans Akebono Engineering, all of the FRIXA brake systems are subjected to the full spectrum of tests, ranging from the typical brake conditions on regular roads to brake conditions in extreme use environment, in order to ensure that they all perform with the strong brake power. * Excellent Reliability & Long Life Using standardized manufacturing facilities, these linings are very reliable, since they are made after the entire manufacturing processes are evaluated thoroughly. The rapid wear toward the end of the linings useful life is prevented by using precise bonding techniques. * Low Brake Noise Using high quality manufacturing processes with soft fibers as the base material, the brake noise is minimized. * No Harmful Materials Fiberglass materials harmful to human are not used. Even non-asbestos materials with fiberglass in them can cause harmful effects to the auto mechanic when the fiberglass dust is inhaled or comes in contact with the skin during auto work.
FRIXA CO., LTD.
 
Mirror  
2011A300058001
External Rear-View Mirror Internal Rear-View Mirror
SHINWOO MECHATRONICS CORP
 
Head Lamp  
2011A30005803
Rectangular Head Lamp Front Combination Lamp
SHINWOO MECHATRONICS CORP
 
Rear Combination Lamp(bus)  
2011A30005804
Rear Combination Lamp Rear Lamp
SHINWOO MECHATRONICS CORP
 
Rear Combination Lamp(heavy)  
2011A300058005
Rounded Direction Indicator Lamp Direction Indicator Lamp Rear Combination Lamp
SHINWOO MECHATRONICS CORP
 
Front Combination Lamp  
2011A300058006
Front Combination Lamp
SHINWOO MECHATRONICS CORP
 
Back-up Lamp  
2011A300058008
Reverse Lamp Rear Combination Lamp Back-up Fog Lamp
SHINWOO MECHATRONICS CORP
 
Wheel  
2012A24003105
Wheel
DAE JIN METAL IND. CO., LTD.
 
RACKTUBE 1  
2011A30014101
RACKTUBE 1
TAELIM INDUSTRY Co., Ltd.
 
RACKTUBE 2  
2011A30014102
RACKTUBE 2
TAELIM INDUSTRY Co., Ltd.
 
Turned Part1  
2011A30014103
JACKET 1
TAELIM INDUSTRY Co., Ltd.
 
Turned Part 2  
2011A30014104
JACKET 2
TAELIM INDUSTRY Co., Ltd.
 
Gear Wheel  
2012A24003109
Gear Wheel
DAE JIN METAL IND. CO., LTD.
 
Shims & Filler  
2014A26003001
Shims & Filler
HYUNE AERO-SPECIALTY INC.
 
CSS700  
1006A29000501
* Lifting capacity : 55,700 kg.m * Lifting capacity/Outreach - 9,280/6.0 kg/m - 4,720/10.0 kg/m - 2,780/15.0 kg/m - 1,050/27.0 kg/m * Working Radius : 27.0 m * Working Height.Max : 29.8 m * Working pressure : 210 kg/† * Rated oil flow : 80/80 /min * Oil tank capacity : 200  * Features Strengthened Boom Structure with hexagonal section, Extraordinary power and Smoother action with Combined type of slewing system, The greatest lifting Capacity of 55.7 T-M in its class
CS MACHINERY CO., LTD.
 
GENERAL DIESEL ENGINE  
2011A28014004
∂ Opening production : 1998.4. ∂ Remarks : ENGINE OIL LEVEL SWITCH ∂ Opening production : 1998.4. ∂ Remarks : ENGINE OIL LEVEL SWITCH
SEYOUNG Co., Ltd.
 
BUZZER  
2011A28014005
∂ Opening production : 1999.4 ∂ Remarks : CERAMIC RESISTOR DELAY TIME CIRCUIT
SEYOUNG Co., Ltd.
 
DOT MATRIX  
2011A28014001
∂ Opening production : 1996.4. ∂ Remarks : Be assembled cluster
SEYOUNG Co., Ltd.
 
FLASHER RELAY  
2011A28014003
∂ Opening production : 1998.10. ∂ Remarks : DIRECTION INDICATOR HAZARD WARNING
SEYOUNG Co., Ltd.
 
Brake Pad  
1006A30000102
* Built with Hankook Tires Reputation Based on the state-of-the-art safety science backed by Hankook Tires technologies, these brake pads are designed and manufactured to provide safety, powerful brake performance, reliability, low noise, environment friendliness, etc. * Developed and tested using state-of-the-art brake testing equipment The quality of our brake pads is further ensured by the testing equipment developed and manufactured by Japans AKEBONO * Exhibits excellent heat resistance and heat insulation characteristics With excellent heat resistance and heat insulation values, these brake pads provide excellent brake power even in winters freezing conditions. * Quick Drying Even if wet by rain water, these pads dry up fast, preventing the lost brake power often seen in the beaches or during the rainy season. * Excellent reliability and long life With excellent reliability, no rapid pad wear or sudden brake power loss occurs even toward the end of the brake pads life. Consistent brake performance is maintained until the end.
FRIXA CO., LTD.
 
CAP PLATE ASSEMBLY  
2011A22014306
1. High electret charging ability 2. Endless retain charge 3. High operating tenperature 4. Cap Plate Assembly Excellent stick punching process) 5. Protecting from Exploding Accident since Upper Operating 6. Preventing from Leaking Electrolyte since Extra Shutting 7. Extra Insulation since Taking Teflon materials 8. Non-Erosion since Extra Chemical Resistance 9. Feasible Mass Production since Automatic Product Line
Sang-A Flontec CO.,LTD
 
Finger Joint  
0906A25003003
. Lower noise - Excellent eveness . Comfort for driver . Easy installation and repair(1~1.2m/piece) . Partial repair available : no traffic jam . New type of finger joint developed by joint cooperation between ESCO Technology and Korea Institute of Machinery and Metals movement)
ESCO RTS
 
Air-con Filter (Cabin Air Filter)  
0912A28001706
Air-con Filter (Cabin Air Filter)
SEWON CO., LTD.
 
Hydraulic Filter  
0912A28001707
Hydraulic Filter
SEWON CO., LTD.
 
LINKAGE ASSEMBLY  
2011A30014107
LINKAGE ASSEMBLY
TAELIM INDUSTRY Co., Ltd.
 
Warping Drum  
2012A24003107
Warping Drum
DAE JIN METAL IND. CO., LTD.
 
Brake Drum  
2012A24003108
Brake Drum
DAE JIN METAL IND. CO., LTD.
 
CSS600  
1006A29000502
* Lifting capacity : 45,000 kg.m * Lifting capacity/Outreach - 7,070/6.0 kg/m - 3,590/10.0 kg/m - 2,140/15.0 kg/m - 1,000/25.2 kg/m * Working Radius : 25.2(29.2) m * Working Height.Max : 28.0(32.0) m * Working pressure : 220/200 kg/† * Rated oil flow : 80/80 /min * Oil tank capacity : 200  * Features Strengthened Boom Structure with hexagonal section, Extraordinary power and Smoother action with Combined type of slewing system, The greatest lifting Capacity of 55.7 T-M in its class
CS MACHINERY CO., LTD.
 
Roll Formed Stringer  
2013A25001502
Stringer is a longitudinal member of fuselage. It supports the tensile and compressive strengths which occur on the fuselage. Our stringer is roll formed from sheet metal. Our products are used in the airplane made by Boeing.
ASTK CO., LTD.
 
Water Seperator  
0912A28001708
water seperator
SEWON CO., LTD.
 
Reservoir  
0912A28001709
reservor
SEWON CO., LTD.
 
Air Element  
0912A28001710
Air Element
SEWON CO., LTD.
 
Air Cleaner Assy  
0912A28001711
Air cleaner Assy
SEWON CO., LTD.
 
Aluminum Type Fuel Filter  
0912A28001712
- Line 1 - Productive Capacity- 10,000 - Productive Amount- 5,000 - Surplus Productive amount- 5000 - Rate of Operation(%)- 50%
SEWON CO., LTD.
 
Pyungkang Mighty  
2013A25003401
* 3 platform of 5 corner boom - the best in same grade and also operate till 75 degrees maximum * double cylinder - double cylinder is make to strong power * reverse triangular structure - for minimum efficiency at boom and cylinder * under-lift - for high class and four carriage * toba triangle - for easy traction * revolving head roller - freely turn to left and right excellent traction for 4 wire hook * double swing reduction gear - up grade swing faculty over double size more than standard
PYUNGKANG SPECIAL VEHICLE CO., LTD.
 
Bending type  
2013A25003402
Do you want just to tow your car or not to tow yours after safe loading your car on a wrecker? New Above-Car series that is made by special know-how of Pyung-Kwang that emulate other company through technique! We will pay a visit to you with more new and wider option. We promise you that we will be your best partner on the way to your successful business. * Automatic outriggers - Supporting a car body strongly by oil pressure * Double Roller - On apply to double sliding roller, loading side is not twisted as above system * Traction winch - On apply pulley way, grade of 3ton winch is play to over power inself. * Tire fixing equipment - for protected the bumper * Air compressor * Wireless remote control on 8 channels - Remove the loading side up-down and scaffold in-out by remote controlled * Automatic locking system - It is automatically pull to cargo(car)s link by oil pressure. Not be swayed.
PYUNGKANG SPECIAL VEHICLE CO., LTD.
 
PKV-LC250H  
2013A25003404
Summary of Libero wrecker Our Libero is manufactured into powerful pentagon boom structure to be able to tow any kind of cars and we will satisfy you that we product the best wrecker. * Revolve of 180 degrees head - for side traction * Front & Back outrigger - for protection of cylinder and wrecker selected four corner leg * Sub winch - add to sub winch of 2tons grade for safety * Main winch - Safe rescue and traction by winch reduction * 5 Corner Boom * Boom Hanger - As hanger of 5 step, possible to control height also confirm to back landscape while to driving * Auto swing of Cylinder type * Air Compressor - For customer convenience As 5.5ps, possible to keep in grade of 80 liter air tank short-time
PYUNGKANG SPECIAL VEHICLE CO., LTD.
 
AUTO T/M CONTROL PARTS  
2011A30013601
USING INFORMATION GATHERED FROM VARIOUS SENSORS, THIS MODULE CONTROLS THE LINE PRESSURE WUTHIN THE VALVE BODY TO EXECUTE AUTOMATIC TRANSMISSION
UNICK CORPORATION CO., LTD.
 
SUPER VISION SLUSTER  
2011A30013602
this speedometer/tachometer instrument panel has driver selectable display colors. the color of the needle changes depending on speed to provide apprppriate information and to prevent speeding
UNICK CORPORATION CO., LTD.
 
Multi information computer  
2011A30013603
using OLE for display, visual acknowledgement is maximized.
UNICK CORPORATION CO., LTD.
 
Separator & fuel control modules  
2011A30013604
installde inside the fuel tank to separate the liquid gas and vapor gas some liquid fuel is stored within
UNICK CORPORATION CO., LTD.
 
Eleckric solenoid cooled EGR valve  
2011A30013605
an advanced research item, this device enables precise controls in diesel engines.
UNICK CORPORATION CO., LTD.
 
B767 Upper Panel Assembly  
2013A25001503
Section 48 Structure Assembly Composition : Machined Skin 1L/I, Panel Assembly 6L/I Skin Quality Capacity : 4 Set / month
ASTK CO., LTD.
 
B747-8 AFA Frame Assembly  
2013A25001504
New Designed Frame Assembly (CATIA Base) Composition : 5 Model, 83 Frame Assembly Snap Together Capacity : 3 Set / month
ASTK CO., LTD.
 
cold forged Products  
0912A28000601
cold forged Products
SINMI PRECISION CO., LTD.
 
Bolt/nut  
0912A28000602
Bolt/nut
SINMI PRECISION CO., LTD.
 
Shaft  
0912A28000603
Shaft
SINMI PRECISION CO., LTD.
 
Ball stud  
0912A28000604
Ball stud
SINMI PRECISION CO., LTD.
 
8.5 incline angel type  
2013A25003403
Do you want just to tow your car or not to tow yours after safe loading your car on a wrecker? New Above-Car series that is made by special know-how of Pyung-Kwang that emulate other company through technique! We will pay a visit to you with more new and wider option. We promise you that we will be your best partner on the way to your successful business. * Double Roller - On apply to double sliding roller, loading side is not twisted as above system * Automatic outriggers - Supporting a car body strongly by oil pressure * Air compressor * Traction winch - On apply pulley way, grade of 3ton winch is play to over power inself. * Tire fixing equipment - for protected the bumper * Wireless remote control on 8 channels - Remove the loading side up-down and scaffold in-out by remote controlled * Automatic locking system - It is automatically pull to cargo(car)s link by oil pressure. Not be swayed.
PYUNGKANG SPECIAL VEHICLE CO., LTD.
 
Aircraft Brake Disk  
2011A31003901
DACC has pioneered the design, qualification and manufacturing of cost efficient alternatives for high usage brake disks. DACC carbon brake disks are now in service with Korean F-16 fighter such as block 32 and block 52, recognized worldwide for their braking power, endurance and cost efficiency. * Development History - F-16 BLCOK 32 AIRCRAFT BRAKE - 1998. 2 : Certification Approval of Military Use (MND) - Delivered serial production to Rokaf annually since 1999 - F-16 BLOCK 52 AIRCRAFT BRAKE - 2001.11 : Certification Approval of Military Use (MND) - Delivered serial production to Rokaf annually since 2002 * Advantages of performance - Longer service life : lower operation cost and wear rate - Safety : higher friction coefficient and short braking distance at Refused Take-off braking - Performance : Excellent Braking and friction stability at high temperature * On-going Project - A/T-50 JET TRAINER BRAKE has been developing - T-4 TRAINER BRAKE has been developing
DACC CO., LTD.
 
Automotive Clutch Disk  
2011A31003903
Carbon Clutch System DACC have developed the clutch system which is the important power unit for land vehicles. At present, The road test have been performing to apply the NISSANs Skyline and HUNDAIs TUSCANI model. * Development History - The development of carbon clutch system of HUNDAIs TUSCANI : ~03.5 - Dynamo-test of Clutch system : 03.5 - Road test apply the HUNDAIs AVANTE XD and TUSCANI model : 04.2 - The Carbon clutch for Racing Car : 05.7 * Advantages of performance - Very low weight - Highest Thermal stress capacity - Longer Service life and enhanced engine pick-up and faster gear change. - No wear on the metal flywheel and on the pressure plate. - Performance : 350 HP, 45Kgf.m,
DACC CO., LTD.
 
Automotive Brake Disk  
2011A31003902
DACC have developed brake disk and pad for the land vehicles such as racing car, high quality car, heavy truck and high speed train on the basis of the aircraft brake disk manufacturing process. At present, the brake performance test has been performing to apply the domestic high quality expensive car and the racing car. * Development History - Domestic high quality expensive car - 2001.09~ : on going - Formula I and Le mans 24 hours racing car - 2001.09~ : on going * Advantages of performance - Longer service life : Disk and pad last longer than 300,000 km and 60,000 km respectively. - Safety:Constant Friction Value at Fade and High friction coefficient at high temperature and speed - Performance : Excellent Braking and friction stability at high temperature
DACC CO., LTD.
 
De-Oiler  
0906A29002903
De-Oiler oil removal system for LNG carriers (Patent No. 10-2002-0019944, Korea) from STI is designed to remove any types of oil contents in the condensate water after heating fuel oil tank, lubricator oil tank, and other tanks. Purified condensate from the De-Oiler unit passes through an oil content monitoring system to confirm the oil content is less than 15 ppm. If the oil content is over 15 ppm, the oil content monitor will operate a three way motor operated valve to route the water to primary tank instead of routing to inspection tank. The oil absorbent used in the De-Oiler unit is a exclusively manufactured from EARTH Canada Inc. The oil absorbent material is installed in cartridge form for easy maintenance. Sight glasses at the top part of the De-Oiler unit are used to check if there is any collected oil and carry out manual discharge. De-Oiler oil removal system by STI is in cylindrical shape with three oil absorbent cartridges installed in series.The cartridges absorb oil and coalesces oil particles to be collected in the manifolds for discharge.
SIMULLATION TECH CO.,LTD.
 
Voyage Data Recorder  
0906A29002904
Voyage Data Recorder (VDR) is a device to record, maintain, and manage various data available onboard a ship in real time. VDR automatically records voyage related data through various data interface channels to allow in-detail investigation of accidents can be made using the recorded data. Purpose of a VDR is just like a Black Box on an airplane. Main difference between the two is in the kinds and amount of data recorded; a VDR records much more types and amount of data than its equivalent on an airplane.
SIMULLATION TECH CO.,LTD.
 
Operator Training Simulator  
0906A29002905
Operator Training Simulator (OTS) is a means to provide operators with realistic operation environment to effectively learn how to operate the target process. The training can range from normal operations and abnormal conditions. In most cases, using the target plant as a training tool is highly costly and dangerous. In this regards, the use of an OTS to train operators is a cost effective, safe, and efficient way. Most cases, training courses that an OTS can provide are, - Cold/Hot Start-up - Normal Operation at various conditions - Normal/emergency shutdown. Target audiences can be as follows, but not limited to, - New operators who has to learn starting from the basics - Experiences operators who are switching from other plants/processes - Experienced operators who needs to work out some abnormal operation conditions
SIMULLATION TECH CO.,LTD.
 
Shoe Ass`y  
1006A30000103
* Powerful Brake Performance, Excellent Noise Absorption Built with new high tech materials using many manufacturing steps, our brake linings provide excellent brake power without noise, ensuring safe and fun driving. * Environment Friendly Rather than using cancer-causing asbestos, environment friendly new high tech materials are used to make the FRIXA brake system safe to our health and to the environment. * Long Life and Low Maintenance Cost Using new high tech materials manufactured at above 1200 degrees in Celsius, the linings life is extended, and the consumer can expect to lower the high maintenance cost from frequent lining replacement when using others. * Excellent heat resistance and heat insulation characteristics With excellent heat resistance and heat insulation values achieved from several manufacturing processes, the powerful brake force is sustained even during the winter.
FRIXA CO., LTD.
 
Brake Pad for AVANTE  
1006A30000105
* Built with Hankook Tires Reputation Based on the state-of-the-art safety science backed by Hankook Tires technologies, these brake pads are designed and manufactured to provide safety, powerful brake performance, reliability, low noise, environment friendliness, etc. * Developed and tested using state-of-the-art brake testing equipment The quality of our brake pads is further ensured by the testing equipment developed and manufactured by Japans AKEBONO * Exhibits excellent heat resistance and heat insulation characteristics With excellent heat resistance and heat insulation values, these brake pads provide excellent brake power even in winters freezing conditions. * Quick Drying Even if wet by rain water, these pads dry up fast, preventing the lost brake power often seen in the beaches or during the rainy season. * Excellent reliability and long life With excellent reliability, no rapid pad wear or sudden brake power loss occurs even toward the end of the brake pads life. Consistent brake performance is maintained until the end.
FRIXA CO., LTD.
 
Shoe Ass`y for ELANTRA  
1006A30000106
* Powerful Brake Performance, Excellent Noise Absorption Built with new high tech materials using many manufacturing steps, our brake linings provide excellent brake power without noise, ensuring safe and fun driving. * Environment Friendly Rather than using cancer-causing asbestos, environment friendly new high tech materials are used to make the FRIXA brake system safe to our health and to the environment. * Long Life and Low Maintenance Cost Using new high tech materials manufactured at above 1200 degrees in Celsius, the linings life is extended, and the consumer can expect to lower the high maintenance cost from frequent lining replacement when using others. * Excellent heat resistance and heat insulation characteristics With excellent heat resistance and heat insulation values achieved from several manufacturing processes, the powerful brake force is sustained even during the winter.
FRIXA CO., LTD.
 
RB520 for Bus Lining  
1006A30000107
* Excellent brake power Using the test equipment developed and manufactured by Japans Akebono Engineering, all of the FRIXA brake systems are subjected to the full spectrum of tests, ranging from the typical brake conditions on regular roads to brake conditions in extreme use environment, in order to ensure that they all perform with the strong brake power. * Excellent Reliability & Long Life Using standardized manufacturing facilities, these linings are very reliable, since they are made after the entire manufacturing processes are evaluated thoroughly. The rapid wear toward the end of the linings useful life is prevented by using precise bonding techniques. * Low Brake Noise Using high quality manufacturing processes with soft fibers as the base material, the brake noise is minimized. * No Harmful Materials Fiberglass materials harmful to human are not used. Even non-asbestos materials with fiberglass in them can cause harmful effects to the auto mechanic when the fiberglass dust is inhaled or comes in contact with the skin during auto work.
FRIXA CO., LTD.
 
DIESEL  
2011A28014006
∂ Opening production :1998.3 ∂ Remarks : WIRE WINDING RESISTOR
SEYOUNG Co., Ltd.
 
TEMP. SENSOR  
2011A28014007
∂ Opening production : 2001.1 ∂ Remarks : TEMP. SENSOR
SEYOUNG Co., Ltd.
 
FUEL TANK  
2011A28014008
∂ Opening production : 2001. 4. ∂ Remarks : 2WAY CUTOFF VALVE
SEYOUNG Co., Ltd.
 
WASHING MACHINE(TA-PJT)  
2011A28014009
∂ Opening production : 2003. 04. ∂ Remarks : CONTROLLER MAIN PCB ASSY.
SEYOUNG Co., Ltd.
 
WASHING MACHINE(KGD2-PJT)  
2011A28014010
∂ Opening production : 2003. 01. ∂ Remarks : CONTROLLER MAIN PCB ASSY.
SEYOUNG Co., Ltd.
 
Structure Brackets Supports  
2014A26003002
Structure Brackets Supports
HYUNE AERO-SPECIALTY INC.
 
Stringer Clips  
2014A26003003
Stringer Clips
HYUNE AERO-SPECIALTY INC.
 
Stringer Clips  
2014A26003004
Stringer Clips
HYUNE AERO-SPECIALTY INC.
 
Machined Details  
2014A26003005
Machined Details
HYUNE AERO-SPECIALTY INC.
 
Machined Stringers  
2014A26003006
Machined Stringers
HYUNE AERO-SPECIALTY INC.
 
Ext C-17 Kit  
2014A26003007
Ext C-17 Kit
HYUNE AERO-SPECIALTY INC.
 
Structure Details  
2014A26003008
Structure Details
HYUNE AERO-SPECIALTY INC.
 
KIT G-V  
2014A26003009
KIT G-V
HYUNE AERO-SPECIALTY INC.
 
Balance Panel  
2014A26003010
Balance Panel
HYUNE AERO-SPECIALTY INC.
 
737 ASSY Tool  
2014A26003011
737 ASSY Tool
HYUNE AERO-SPECIALTY INC.
 
A380 MFXTR  
2014A26003012
A380 MFXTR
HYUNE AERO-SPECIALTY INC.
 
737 Cast  
2014A26003013
737 Cast
HYUNE AERO-SPECIALTY INC.
 
Titanium Cast  
2014A26003014
Titanium Cast
HYUNE AERO-SPECIALTY INC.
 
Cold Forging Parts  
1012A25000201
Cold Forging Parts
NOJEON Co., Ltd.
 
Seat Recliner Shaft  
1012A25000202
Seat Recliner Shaft
NOJEON Co., Ltd.
 
Rivettiing & Welding Assembly Parts  
1012A25000203
Rivettiing & Welding Assembly Parts
NOJEON Co., Ltd.
 
Height Adjuster Assembly  
1012A25000204
Height Adjuster Assembly
NOJEON Co., Ltd.
 
Automobile parts  
2012B25006003
Automobile parts
Dong-Lim Industrial Co., Ltd
 
Condensers  
2012A30000501
- Non - Friction Lining Type Pulley - 4 & 6 Pole Pulley & Bearing Assy - Forged material, SAE 1008 °≠ 1010 - Heavy duty machined / Welding & Piercing type - Multi / Single groove type - Built in accurate dimension - Feasible Design for any armature models - Excellent durability
CLIZEN Inc.
 
Evaporator  
2012A30000502
- Friction Lining Type Pulley - 4 Pole Pulley & Bearing Assy - Forged & forming type, material : SAE 1008°≠1010 - Heavy duty machined/Welding, Piercing & Friction material - Multi / Single groove type - Built in accurate dimension - Feasible Design for any armature models - Excellent durability
CLIZEN Inc.
 
Radiators  
2012A30000503
- Available for 3 eyes type, Leaf spring type, Rubber damper type - Built in accurate dimension - Provide excellent durability against vibrations and shocks - Compact and light weight design
CLIZEN Inc.
 
Heater Cores  
2012A30000504
- Forged aluminum material (AP2-T6) - Teflon / Tin coating - Internal passage designed for low noise
CLIZEN Inc.
 
Automotive Compressor Clutch Pulleys  
2012A30000507
- V5 type 7 color(Green, Yellow, Purple, Blue, Brown, Red, Orange)
CLIZEN Inc.
 
Automotive Compressor Pistons  
2012A30000508
The Condenser is installed at the very front of the engine room, cooling and converting the high-temperature and high-pressure A/C refrigerator out of the Compressor into liquid refrigerant. The Condenser includes tubes, fins and a header pipe connected to several tubes. The Condenser includes Fin-tube type, Serpentine type, and Multi-flow type, depending on the form and method of production. We have continuously developed the condenser to ensure lightweight, miniaturization and high performance and at this moment we manufacture the condenser ; 34, 27, 25.9, 18.5, 18 and 16 in width
CLIZEN Inc.
 
EHA  
2012A28004801
The EHA is a multifunctional elevated light used for several applications such as: -Precision Approach Lighting Category I, II and III, white and red -Threshold and Threshold Wingbar Lighting Category I, II and III -Runway End lighting The complete fitting consists of a light head housing the optical components and the light body support is made of die-cast aluminium for mounting on a 60mm outside diameter stem allowing azimuth and elevation angle adjustment up to 30į. The optical assembly consists of an anodised aluminium reflector, a prefocus tungsten halogen lamp and a heat resistant front glass with silicon gasket. The lamp is positioned and held in the reflector by a stainless steel bracket allowing relamping to be done from the rear side without the use of any tool.
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
EHB  
2012A28004802
The EHB consists of a frangible stem in aluminium casting mounted on a 2 inch 11 TPI threaded coupling, an upper body in die casting aluminium housing the GY-9.5 lamp holder and the optical parts made of heat resistant glass. All the hardware is made of stainless steel. The optical assembly consists of an outer glass dome having an external smooth surface to prevent accumulation of dirt and two beam shaping lenses. Coloured inner lenses can be mounted if required by ICAO colour coding. The light fitting is supplied with a 2-pole plug FAA L-823 with heat resistant wires.
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
ELA  
2012A28004803
The ELA consist a frangible stem in aluminium casting mounted on a 2 inch 11 TPI threaded coupling, an upper body in die casting aluminium housing the GY-9.5 lamp holder. All the hardware is made of stainless steel. The optical assembly consists of an outer plastic or glass dome. The light fitting is supplied with a 2-pole plug FAA L-823 with heat resistant wires.
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
CCR1  
2012A28004804
The YCR 3000 CCR1 has been specially developed. for use on airfield lighting series circuits taking into account specific requirements and for reliability, accuracy and ease of maintenance. The YCR3000 CCR1 is a simple and sturdy unit benefiting from the long experience of youyang in this field. This means compact construction and easy adaptation to perational demands as well as to individual demands for special features.
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
RCS1  
2012A28004805
APPLICATIONS This system is designed for small airports where few CCRs are installed
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
WIND CONE  
2012A28004806
The WINDCONE (wind direction indicator) gives a visual indication of the direction and speed of the wind at airports and heliports. When air moves even at very low speed, the revolving system,situated at the top part of the pole, will turn in direction of the movement. The throat of the wind sleeve will conduct the wind and the sleeve will swing. At higher wind speed (approx. 30 km/hour, the sleeve inflates and indicates visually wind direction and speed.The Wind Direction Indicator is available in two styles, lighted and unlighted, and two sizes.
YOUYANG AIRPORT LIGHT EQUIPMENT INC.
 
VARIABLE FILLING-NVC  
0911A29000201
- Simplified and Economical Design - Horizontal Self-Supporting, Housing in Tunnel Type - Internal Gear Driven Oil Pump - Antifriction Bearing with Continuous Lubrication - Oil Cooler with Water Cooling - Remote and Auto. Control - Speed Control of 20~100
NARA CORPORATION CO., LTD.
 
TURNING GEAR  
0911A29000202
- NARAs Turning Gear is being manufactured with planetary gear. - It is applied to the marine engine of low and medium speed. - It helps to assemble the engine by turning the Flywheel gear. - Used for an overhaul and auxiliary lubrication of the engine during anchoring.
NARA CORPORATION CO., LTD.
 
FLANGE FLEXIBLE COUPLING  
0911A29000203
- Backlash and Maintenance free. - Absorb the shock and vibration. - Long life time.
NARA CORPORATION CO., LTD.
  | 1 | 2 | 3 |  

Copyright 2009 (c) DAPA (Defense Acquisition Program Administration) & SMBA (The Small & Medium Business Administration), All Rights Reserved.